KONICA MINOLTA NFC Tag Writer

NFC Tag Writer is the Android Application to write data format regulated by KONICA MINOLTA to NFC tag so PageScope Mobile for Android can carry out device registration, printing, and scanning easily just by touching NFC tag.

Also, after reading data format regulated by KONICA MINOLTA written in NFC tag or QR Code, data that was read can be written to NFC tag .

Please download this Application after confirming the following precautions.

[Main function Introduction of the Application]

■ Write the data to NFC tag.

- After user enters information required to register the device or Print Settings in PageScope Mobile for Android, entered data can be written to NFC tag.

■ Reading the NFC tag data.

- After the NFC tag written data format required by KONICA MINOLTA is read, information that was read is displayed . Also, information that was read can be written to NFC tag.

■ Reading the QR Code

- After the QR Code containing written data format regulated by KONICA MINOLTA is read, the read information is displayed. In addition, the information that was read can be written to NFC tag.

[Operating Environment]

OS:

Android 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 5.0 / 5.1 / 6.0

Memory:

256MB(RAM) & above

Screen resolution:

320x240(QVGA) & above

Tested devices:

samsung GALAXY Nexus(OS4.0)

Asus Nexus7(OS4.2/4.3)

LG Nexus5(OS4.4)

HTC Nexus9(OS5.0)

Motorola Nexus6(OS5.1)

Huawei Nexus6P(OS 6.0)

The device must be a mobile computing device such as smartphone or tablet with NFC-enabled device.

The device must have undergone the Google CTS test.(Devices with independently customized operating systems such as e-book readers are not supported.)

The following NFC Tag is the recommended tag for use with the NFC Tag Writer.

- SMARTRAC NFC BullsEye NTAG216 Wet

[Precautions]

- Wi-Fi environment is required.

- When connecting this Application and PageScope Mobile, PageScope Mobile for Android Ver 4.0.0 or later is required.

</div> <div jsname="WJz9Hc" style="display:none">NFC标签作家是Android应用程序写入由KONICA MINOLTA调整到NFC标签数据格式，使手机的PageScope为Android很容易只通过触摸NFC标签进行设备注册，打印和扫描。

此外，通过读取写入NFC标签的柯尼卡美能达或QR码，数据读取可写入NFC标签规范的数据格式后。

请确认以下注意事项后，下载该应用。

[应用程序的主要功能介绍]

■将数据写入NFC标签。

- 用户输入注册在PageScope手机为Android设备或打印设置所需的信息后，输入的数据可以被写入到NFC标签。

■读取NFC标签的数据。

- 由柯尼卡美能达所需要的NFC标签写入数据格式读取后，显示所读取的信息。另外，所读取的信息可以写入NFC标签。

■读取QR码

- 包含由柯尼卡美能达调节写入的数据格式的QR码读取后，显示该读出的信息。此外，被读出的信息可以写入NFC标签。

[操作环境]

操作系统：

搭载Android 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 5.0 / 5.1 / 6.0

记忆：

256MB（RAM）及以上

屏幕分辨率：

320×240（QVGA）及以上

测试的设备：

三星GALAXY Nexus（OS4.0）

华硕Nexus7（OS4.2 / 4.3）

LG Nexus5（OS4.4）

HTC Nexus9（OS5.0）

摩托罗拉Nexus6（OS5.1）

华为Nexus6P（OS 6.0）

该设备必须是一个移动计算设备，诸如智能电话或平板电脑启用NFC的设备。

该设备必须经受了谷歌CTS测试。（带独立定制的操作系统，如电子书阅读器设备不被支持。）

下面的NFC标签是带有NFC标签作家使用推荐的标签。

- SMARTRAC NFC靶心NTAG216湿

[注意事项]

- 需要Wi-Fi环境。

- 当连接此应用程序和移动的PageScope，移动的PageScope为Android 4.0.0版本或更高版本是必需的。</div> <div class="show-more-end">